{"product_id":"lictor-pistol","title":"Lictor Pistol","description":"\u003c!-- PAGE TITLE TAG --\u003e\n\u003c!-- Lictor G9 Double Pistol Magazine Carrier | Raven Concealment Systems --\u003e\n\u003c!-- 70 characters — at the ceiling but within range. --\u003e\n\u003c!-- NOTE: V9 draft was 78 characters. Corrected per catalog standard — brand name added, redundant segments removed. --\u003e\n\n\u003c!-- META DESCRIPTION --\u003e\n\u003c!-- Double pistol magazine carrier for concealed carry and duty. Ambidextrous, adjustable retention, fits major service pistol mags. Includes belt clip. Made in USA. --\u003e\n\u003c!-- ~161 characters — trim one word if needed to reach 160 --\u003e\n\n\n\u003ch2\u003eLictor G9 Double Pistol Magazine Carrier\u003c\/h2\u003e\n\n\u003cp\u003eThe minimum carrier for the maximum payload. Run two Lictor G9 carriers side by side and carry four magazines in just slightly more space than most double carriers need for two.\u003c\/p\u003e\n\n\u003cp\u003eThe Lictor G9 is a rigid polymer double pistol magazine carrier built for carriers who need two magazines on the belt in the smallest possible footprint, with a clip-mount design that goes on and off without threading through a belt loop.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMade in USA\u003c\/strong\u003e | \u003cstrong\u003eUnconditional lifetime warranty\u003c\/strong\u003e | \u003cstrong\u003eIssued to military and federal law enforcement prior to commercial release\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor G9 is built for carriers who need two pistol magazines on the belt without sacrificing more real estate than necessary.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlainclothes law enforcement\u003c\/li\u003e\n  \u003cli\u003eConcealed carry under a sport coat or untucked shirt\u003c\/li\u003e\n  \u003cli\u003ePersonnel scaling between plainclothes and overt configurations\u003c\/li\u003e\n  \u003cli\u003eWar belt and plate carrier users who want a single carrier for both roles\u003c\/li\u003e\n  \u003cli\u003eConcealed carriers who run more than one carrier on the belt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eLess Ideal For\u003c\/h4\u003e\n\n\u003cp\u003eThe Lictor G9 is not the right choice for every situation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCarriers who prioritize maximum flatness over footprint efficiency — see the \u003ca href=\"[LINK:%20Copia%20PDP]\"\u003eCopia\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003cli\u003eSingle-magazine minimalist carry setups\u003c\/li\u003e\n  \u003cli\u003eDeep concealment under fitted or tailored clothing where any carrier profile is a problem\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eQuick Scan\u003c\/h3\u003e\n\n\u003ctable style=\"width:100%; table-layout:fixed;\"\u003e\n  \u003ccolgroup\u003e\n    \u003ccol style=\"width:30%;\"\u003e\n    \u003ccol style=\"width:70%;\"\u003e\n  \u003c\/colgroup\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"width:30%;\"\u003eFeature\u003c\/th\u003e\n      \u003cth style=\"width:70%;\"\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCarrier Type\u003c\/td\u003e\n      \u003ctd\u003eDouble pistol magazine carrier\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Magazines\u003c\/td\u003e\n      \u003ctd\u003e9mm and .40-caliber double-stack mil-spec magazines\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitments\u003c\/td\u003e\n      \u003ctd\u003eGlock 17, Glock 19, Glock 45, Sig Sauer M17, Sig Sauer M18, Beretta M9, CZ P07, CZ-75, Beretta APX, Beretta PX4, Walther PPQ, Springfield XD, Springfield XDM — see available fitments below\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMagazine Capacity\u003c\/td\u003e\n      \u003ctd\u003eTwo magazines\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrientation\u003c\/td\u003e\n      \u003ctd\u003eAmbidextrous\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRetention\u003c\/td\u003e\n      \u003ctd\u003eAdjustable via Phillips head screw\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBelt Attachment\u003c\/td\u003e\n      \u003ctd\u003eQuick-detach 1.5\" belt clip included — snaps on and off without threading through a belt loop\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMOLLE\/PALS Compatible\u003c\/td\u003e\n      \u003ctd\u003eYes — belt clip removal exposes mounting bosses; aftermarket MOLLE adaptor required, sourced separately\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColors\u003c\/td\u003e\n      \u003ctd\u003eBlack, Coyote Brown, Multicam (MATBOCK)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrice\u003c\/td\u003e\n      \u003ctd\u003e$49.99\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMade in USA\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eUnconditional lifetime warranty — follows the product, not the purchaser\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe Standard\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor G9 is the smallest-footprint double magazine carrier RCS has built, and the first RCS pistol magazine carrier that does not have to be threaded onto a belt.\u003c\/p\u003e\n\n\u003cp\u003eA federal law enforcement agency requested it. RCS built it, the agency tested and approved it, purchased it for issue to their personnel, and RCS brought it to the commercial market after fulfilling that contract.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eTwo fully loaded magazines, carried at the waistline, accessible whether the carrier is riding under a sport coat or mounted high on a plate carrier. The relief cuts on the outboard face are cut for both positions, not one or the other.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eRetention is set by a single Phillips head screw. Tighten it for a more secure hold, back it off for a smoother draw. One carrier, one adjustment.\u003c\/p\u003e\n\n\u003cp\u003eThe belt clip is new to this platform too. It snaps on and off without threading through a belt loop, which means the carrier moves with the assignment instead of staying wherever it was first set up.\u003c\/p\u003e\n\n\u003cp\u003eFor more than two decades, Raven Concealment Systems has focused on a single problem: carrying a fighting system in a world that cannot know you have it. The Lictor G9 applies that same discipline to the spare ammunition that system depends on.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eGood gear disappears from behavior.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhat Makes a Double Pistol Magazine Carrier Work\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eRequirement\u003c\/th\u003e\n      \u003cth\u003eWhy It Matters\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccepts issued service pistol magazines across major platforms\u003c\/td\u003e\n      \u003ctd\u003eIssued environments run multiple pistol platforms simultaneously; a carrier that fits only one magazine type creates a logistics problem that individual users and organizations cannot always plan around.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAmbidextrous configuration\u003c\/td\u003e\n      \u003ctd\u003eOperational assignments, injuries, and individual preference all change which hand a carrier draws with; a side-specific carrier builds a constraint into the system before the first use.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuick don and doff without lacing through a belt\u003c\/td\u003e\n      \u003ctd\u003eA carrier that has to be threaded on and off a belt stays in one configuration; a clip-mount carrier moves with the assignment.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMOLLE\/PALS compatible via aftermarket adaptor\u003c\/td\u003e\n      \u003ctd\u003ePersonnel who need to move the carrier from a belt to a plate carrier or war belt can do so by swapping out the belt attachment for an aftermarket MOLLE\/PALS adaptor.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSmallest possible footprint for two magazines\u003c\/td\u003e\n      \u003ctd\u003eTwo magazines at the waistline is a real footprint; the carrier cannot change that, but every inch it adds beyond the magazines themselves works against the carry problem.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRelief cuts on the outboard face of each magazine\u003c\/td\u003e\n      \u003ctd\u003eRelief cuts allow the carrier to cover more of the magazine for a more secure hold while still giving the drawing hand purchase on the magazine base.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eThe Lictor G9 was built around those requirements from the beginning.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe Magazine Carrier Compromise\u003c\/h3\u003e\n\n\u003cp\u003eRCS already makes a double pistol magazine carrier optimized for concealment: the \u003ca href=\"[LINK:%20Copia%20PDP]\"\u003eCopia\u003c\/a\u003e. The Copia uses a pancake-style design that keeps both magazines flat against the body and as close to invisible as a double carrier gets. That design works. It is effective at what it does.\u003c\/p\u003e\n\n\u003cp\u003eIt also has to be laced onto the belt, and it claims more real estate along the belt line because spreading the magazines flat is what keeps them close to the body.\u003c\/p\u003e\n\n\u003cp\u003eThe Lictor G9 is a different tradeoff within the same concealment category. The magazines sit side by side in a narrower carrier that mounts to a belt clip rather than threading through a loop. The footprint along the belt line is smaller. Don and doff is faster. The carry profile is not quite as flat as the Copia, but it is still a concealment-viable carrier for most users under most cover garments.\u003c\/p\u003e\n\n\u003cp\u003eNeither design is better. They solve different versions of the same problem. The Copia prioritizes flatness. The Lictor G9 prioritizes footprint and speed of transition. Which one belongs on your belt depends on which constraint you are managing.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eFeature\u003c\/th\u003e\n      \u003cth\u003eLictor G9\u003c\/th\u003e\n      \u003cth\u003eCopia\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCarrier type\u003c\/td\u003e\n      \u003ctd\u003eRigid polymer\u003c\/td\u003e\n      \u003ctd\u003eRigid polymer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMagazine capacity\u003c\/td\u003e\n      \u003ctd\u003eTwo\u003c\/td\u003e\n      \u003ctd\u003eTwo\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProfile\u003c\/td\u003e\n      \u003ctd\u003eNarrow, side by side\u003c\/td\u003e\n      \u003ctd\u003eFlat, pancake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBelt attachment\u003c\/td\u003e\n      \u003ctd\u003eClip-mount, no lacing required\u003c\/td\u003e\n      \u003ctd\u003eMust be laced on and off belt\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBelt real estate\u003c\/td\u003e\n      \u003ctd\u003eNarrow vertical footprint\u003c\/td\u003e\n      \u003ctd\u003eWider lateral spread\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConcealment\u003c\/td\u003e\n      \u003ctd\u003eConcealment-viable for most users\u003c\/td\u003e\n      \u003ctd\u003eMaximum flatness\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMOLLE\/PALS compatible\u003c\/td\u003e\n      \u003ctd\u003eYes, via aftermarket adaptor\u003c\/td\u003e\n      \u003ctd\u003eNo\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDual-carrier configuration\u003c\/td\u003e\n      \u003ctd\u003eTwo G9s side by side = four magazines in just slightly more space than most double carriers need for two\u003c\/td\u003e\n      \u003ctd\u003ePossible, but claims significant belt real estate\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhere It Works\u003c\/h3\u003e\n\n\u003ch4\u003eFor Concealed Carry\u003c\/h4\u003e\n\u003cp\u003eThe Lictor G9 carries two magazines at the waistline in a narrow side-by-side profile that works under a sport coat, an untucked shirt, or most cover garments. The belt clip keeps the carrier close to the body without adding the lateral spread of a pancake-style carrier.\u003c\/p\u003e\n\n\u003ch4\u003eFor Plainclothes Law Enforcement\u003c\/h4\u003e\n\u003cp\u003eThe clip-mount design means the carrier goes on and comes off without threading through a belt loop. Personnel moving between plainclothes and uniformed configurations can scale their loadout without a gear change.\u003c\/p\u003e\n\n\u003ch4\u003eFor War Belts and Plate Carriers\u003c\/h4\u003e\n\u003cp\u003eThe belt clip removes to expose mounting bosses that accept aftermarket MOLLE\/PALS adaptors. The same carrier that ran concealed at the waistline mounts directly to a war belt or plate carrier without modification to the carrier itself.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe Profile\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor G9 carries two magazines side by side along the belt line in the smallest footprint RCS has achieved for a double pistol magazine carrier. The carrier sits close to the body rather than projecting away from it.\u003c\/p\u003e\n\n\u003cp\u003eThe outboard face of each magazine position has relief cuts that give the drawing hand purchase on the magazine base. Those cuts allow the carrier to cover more of the magazine than a minimally-designed carrier would, which contributes to a more secure hold, while still giving the hand enough contact to establish a draw without fumbling.\u003c\/p\u003e\n\n\u003cp\u003eThe 1.5\" belt clip holds the carrier securely on the belt and close to the body. It snaps on and off without threading through a belt loop. Removing the clip exposes mounting bosses on the rear face of the carrier that accept aftermarket MOLLE\/PALS adaptors.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eAmbidextrous. Intentionally.\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor G9 is fully ambidextrous — not ambidextrous by removing a component and reinstalling it on the opposite side, but as shipped without modification.\u003c\/p\u003e\n\n\u003cp\u003eThe relief cuts on the outboard face are symmetrical. An organization issuing this carrier across a diverse personnel roster does not produce a separate purchase order for left-handed carriers.\u003c\/p\u003e\n\n\u003cp\u003eOperational assignments change. Injuries change which hand is available. Preference changes. The Lictor G9 does not build a constraint into the system before the first use.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eBelt Clip — Included\u003c\/h3\u003e\n\n\u003cp\u003eThe 1.5\" belt clip ships with the Lictor G9.\u003c\/p\u003e\n\n\u003cp\u003eThe clip mounts to the rear face of the carrier and allows the carrier to go on and come off a belt quickly, without threading through a belt loop, without tools, without a process that discourages the transition. Personnel who need to scale their loadout up or down as assignments shift can do it without a gear change.\u003c\/p\u003e\n\n\u003cp\u003eThe clip is removable. Behind it are mounting bosses on the rear face of the carrier that accept aftermarket MOLLE\/PALS mounting adaptors, sourced separately.\u003c\/p\u003e\n\n\u003cp\u003eThe clip is the default. The bosses give the user more options.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCompatible Magazines\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor G9 accepts 9mm and .40-caliber double-stack magazines built to standard service pistol dimensions. The carrier was designed around the three dominant service pistol platforms: the Glock 17, 19, and 45; the Sig Sauer M17 and M18; and the Beretta M9. It is also compatible with additional commercial platforms that share similar magazine dimensions, including the CZ P07, CZ-75, Beretta APX, Beretta PX4, Walther PPQ, Springfield XD, and Springfield XDM. The Lictor G9 was developed to serve the professional concealed carry and duty ecosystem — covering the primary service pistol magazine platforms in law enforcement, government, and civilian defensive use where two magazines at the waistline is the operational requirement.\u003c\/p\u003e\n\n\u003cp\u003eConfirm your magazine dimensions against the fitment list above before purchase. Magazines outside the standard double-stack 9mm\/.40 envelope may not seat correctly.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eAvailable Fitments\u003c\/h3\u003e\n\n\u003ch4\u003eGlock\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eGlock 17\u003c\/li\u003e\n  \u003cli\u003eGlock 19\u003c\/li\u003e\n  \u003cli\u003eGlock 45\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSig Sauer\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM17\u003c\/li\u003e\n  \u003cli\u003eM18\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eBeretta\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM9\u003c\/li\u003e\n  \u003cli\u003eAPX\u003c\/li\u003e\n  \u003cli\u003ePX4\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eCZ\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eP07\u003c\/li\u003e\n  \u003cli\u003eCZ-75\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWalther\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePPQ\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpringfield Armory\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eXD\u003c\/li\u003e\n  \u003cli\u003eXDM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eAdditional fitments available. Select your magazine above to confirm compatibility.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCurrent RCS Customer Note\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor G9 uses the proprietary RCS belt clip and rear-mount hole pattern introduced with the Lictor platform. Existing RCS magazine carrier attachments from prior product generations may not be compatible. Current Lictor-compatible attachment options are available here: \u003ca href=\"[LINK:%20Lictor-compatible%20attachment%20options%20%E2%80%94%20confirm%20URL%20with%20developer%20before%20launch]\"\u003e[LINK — confirm URL with developer before launch]\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003ch4\u003eCan the Lictor G9 carry two fully loaded magazines securely?\u003c\/h4\u003e\n\u003cp\u003eYes. The Lictor G9 holds two fully loaded pistol magazines with adjustable retention. A Phillips head screw on the carrier controls how much force is required to draw the magazine. Tighten it for a more secure hold, back it off for a smoother draw.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is the difference between the Lictor G9 and the Lictor M4?\u003c\/h4\u003e\n\u003cp\u003eThe Lictor G9 is a double pistol magazine carrier, accepting two 9mm or .40-caliber double-stack handgun magazines. The Lictor M4 is a single rifle magazine carrier, accepting AR-15 and M4 magazines in 20- and 30-round configurations. Both share the same belt clip system, MOLLE mounting interface, and overall platform design philosophy. One carries pistol ammunition, the other carries rifle ammunition.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the Lictor G9 work left-handed?\u003c\/h4\u003e\n\u003cp\u003eYes. The Lictor G9 is fully ambidextrous. The relief cuts are symmetrical; no modification, component swap, or separate left-hand configuration is required.\u003c\/p\u003e\n\n\u003ch4\u003eCan the Lictor G9 mount to a plate carrier or war belt?\u003c\/h4\u003e\n\u003cp\u003eYes. Removing the belt clip exposes mounting bosses on the rear face of the carrier that are compatible with aftermarket MOLLE\/PALS adaptors. The adaptor is sourced separately.\u003c\/p\u003e\n\n\u003ch4\u003eWhat pistol platforms does the Lictor G9 fit?\u003c\/h4\u003e\n\u003cp\u003eThe Lictor G9 accepts 9mm and .40-caliber double-stack magazines from the Glock 17, Glock 19, Glock 45, Sig Sauer M17 and M18, Beretta M9, CZ P07, CZ-75, Beretta APX, Beretta PX4, Walther PPQ, Springfield XD, and Springfield XDM. The carrier is dimensioned around standard service pistol magazine specifications.\u003c\/p\u003e\n\n\u003ch4\u003eWhat can I use to mount the Lictor G9 if I do not want to use the belt clip?\u003c\/h4\u003e\n\u003cp\u003eRemoving the belt clip exposes mounting bosses on the rear face of the carrier that accept aftermarket MOLLE\/PALS mounting adaptors. These adaptors are not included and are sourced by the end user. The 1.5\" belt clip ships standard with every Lictor G9.\u003c\/p\u003e\n\n\u003ch4\u003eWas the Lictor G9 designed for concealed carry?\u003c\/h4\u003e\n\u003cp\u003eThe Lictor G9 works in both concealed carry and overt configurations. Its narrow profile and adjustable retention make it suitable for plainclothes carry under a sport coat or untucked shirt. The same carrier runs on a war belt or plate carrier without modification.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is the best double magazine carrier for concealed carry?\u003c\/h4\u003e\n\u003cp\u003eA double magazine carrier that works concealed must hold two fully loaded magazines without adding significant width to the body profile, allow clean magazine access under a cover garment, and carry quietly under daily movement. The Lictor G9 was developed at the request of a federal law enforcement agency, issued before commercial release, and is designed to work in both plainclothes and overt configurations.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the Lictor G9 require tools to adjust retention?\u003c\/h4\u003e\n\u003cp\u003eYes. Retention is adjusted with a Phillips head screwdriver. Tightening the screw increases the force required to draw the magazine; backing it off reduces it. The adjustment is simple and does not require disassembling the carrier.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable style=\"width:100%; table-layout:fixed;\"\u003e\n  \u003ccolgroup\u003e\n    \u003ccol style=\"width:30%;\"\u003e\n    \u003ccol style=\"width:70%;\"\u003e\n  \u003c\/colgroup\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"width:30%;\"\u003eFeature\u003c\/th\u003e\n      \u003cth style=\"width:70%;\"\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrice\u003c\/td\u003e\n      \u003ctd\u003e$49.99\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCarrier Type\u003c\/td\u003e\n      \u003ctd\u003eDouble pistol magazine carrier\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Magazines\u003c\/td\u003e\n      \u003ctd\u003e9mm and .40-caliber double-stack, mil-spec service pistol dimensions\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMagazine Capacity\u003c\/td\u003e\n      \u003ctd\u003eTwo magazines\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRetention\u003c\/td\u003e\n      \u003ctd\u003eAdjustable via Phillips head screw\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHand Orientation\u003c\/td\u003e\n      \u003ctd\u003eAmbidextrous\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBelt Attachment Included\u003c\/td\u003e\n      \u003ctd\u003eYes — proprietary quick-detach 1.5\" belt clip\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMOLLE\/PALS Compatible\u003c\/td\u003e\n      \u003ctd\u003eYes — clip removal exposes mounting bosses; aftermarket adaptor required, sourced separately\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColors\u003c\/td\u003e\n      \u003ctd\u003eBlack, Coyote Brown, Multicam (MATBOCK)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eUnconditional lifetime warranty — follows the product, not the purchaser\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003c!-- END OF PUBLISHABLE CONTENT --\u003e\n","brand":"Raven Concealment Systems","offers":[{"title":"Black","offer_id":43275565072497,"sku":"G9LPDBK1.5BC-1","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Coyote Brown","offer_id":43275565105265,"sku":"G9LPDCY1.5BC","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Multicam","offer_id":43275565138033,"sku":"ARSMCUBK1.5BC-MCS","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4387\/5185\/files\/2217.jpg?v=1782162986","url":"https:\/\/www.rcsgear.com\/products\/lictor-pistol","provider":"Raven Concealment Systems","version":"1.0","type":"link"}