{"product_id":"lictor-rifle","title":"Lictor M4","description":"\u003c!-- PAGE TITLE TAG --\u003e\n\u003c!-- Lictor M4 AR-15 Magazine Carrier | Raven Concealment Systems --\u003e\n\u003c!-- 61 characters — within target range. --\u003e\n\n\u003c!-- META DESCRIPTION --\u003e\n\u003c!-- Low-vis AR-15 and M4 magazine carrier for plainclothes use. Ambidextrous, accepts 20- and 30-round mags, includes quick-detach belt clip. --\u003e\n\u003c!-- 140 characters — within range --\u003e\n\n\n\u003ch2\u003eLictor M4 AR-15 Magazine Carrier\u003c\/h2\u003e\n\n\u003cp\u003eCarry the reload. Do not carry the signature. The Lictor M4 is a rifle magazine carrier designed for environments where carrying one is not supposed to be obvious.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMade in USA\u003c\/strong\u003e | \u003cstrong\u003eUnconditional lifetime warranty\u003c\/strong\u003e | \u003cstrong\u003eDeveloped at the direct request of a federal law enforcement agency\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor M4 is built for people who need a rifle magazine on them without anyone knowing it.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlainclothes law enforcement\u003c\/li\u003e\n  \u003cli\u003eExecutive and personal protection details\u003c\/li\u003e\n  \u003cli\u003eSurveillance and undercover operations\u003c\/li\u003e\n  \u003cli\u003ePersonnel working in and around vehicles\u003c\/li\u003e\n  \u003cli\u003eLow-vis personal security work\u003c\/li\u003e\n  \u003cli\u003eCivilians carrying a rifle-caliber contingency loadout without it being visible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eQuick Scan\u003c\/h3\u003e\n\n\u003ctable style=\"width:100%; table-layout:fixed;\"\u003e\n  \u003ccolgroup\u003e\n    \u003ccol style=\"width:30%;\"\u003e\n    \u003ccol style=\"width:70%;\"\u003e\n  \u003c\/colgroup\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"width:30%;\"\u003eFeature\u003c\/th\u003e\n      \u003cth style=\"width:70%;\"\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCarrier Type\u003c\/td\u003e\n      \u003ctd\u003eSingle AR-15 \/ M4 rifle magazine carrier\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary Use\u003c\/td\u003e\n      \u003ctd\u003eLow-vis \/ plainclothes carry\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Magazines\u003c\/td\u003e\n      \u003ctd\u003eAR-15 and M4 magazines — 20-round and 30-round\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitments\u003c\/td\u003e\n      \u003ctd\u003eGI aluminum, Magpul PMAG, Tango Down ARC, Lancer, and common-issue AR-15\/M4 magazines\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMagazine Orientation\u003c\/td\u003e\n      \u003ctd\u003eRounds-forward and rounds-rearward — both supported\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFunnel Top\u003c\/td\u003e\n      \u003ctd\u003eYes — aids magazine seating on reload\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBelt Attachment\u003c\/td\u003e\n      \u003ctd\u003eQuick-detach belt clip included — snaps on and off without threading through a belt loop\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMOLLE\/PALS Compatible\u003c\/td\u003e\n      \u003ctd\u003eYes — belt clip removal exposes mounting holes; aftermarket MOLLE adaptor required, sourced separately\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHand Orientation\u003c\/td\u003e\n      \u003ctd\u003eAmbidextrous\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRetention\u003c\/td\u003e\n      \u003ctd\u003eGeometric — no retention screws\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColors\u003c\/td\u003e\n      \u003ctd\u003eBlack, Coyote Brown, Multicam (MATBOCK)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrice\u003c\/td\u003e\n      \u003ctd\u003e$49.99\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMade in USA\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eUnconditional lifetime warranty — follows the product, not the purchaser\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe Standard\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor M4 magazine carrier was developed at the direct request of a federal law enforcement agency that needed to carry an AR-15 or M4 magazine in a plainclothes role: quietly, accessibly, and without the mechanical failure points that conventional rifle magazine carriers accept as normal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eA loaded GI aluminum magazine under a sport coat. A 30-round PMAG on a belt that disappears under an untucked shirt.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eMost rifle magazine carriers are designed for the overt role: plate carrier, war belt, chest rig. The result performs on a war belt and fails under a sport coat, which is acceptable until the mission requires both.\u003c\/p\u003e\n\n\u003cp\u003eThe Lictor M4 was designed for the concealment problem first. The overt capability followed from that.\u003c\/p\u003e\n\n\u003cp\u003eThe design holds a fully loaded 20- or 30-round magazine, rounds-forward or rounds-rearward, without retention screws, without flaps, and without the orientation restriction that forces an organization to train around the carrier rather than training with it. A funnel top makes seating a magazine in the carrier smooth and intuitive, whether kitting up before the mission or tac-loading after a string of fire.\u003c\/p\u003e\n\n\u003cp\u003eFor more than two decades, Raven Concealment Systems has focused on a single problem: carrying a fighting system in a world that cannot know you have it. The Lictor M4 extends that discipline to the rifle magazine that a fighting pistol sometimes depends on.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eGood gear disappears from behavior.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhat Makes an AR-15 Magazine Carrier Work\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eRequirement\u003c\/th\u003e\n      \u003cth\u003eWhy It Matters\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSmallest possible footprint for a loaded rifle magazine\u003c\/td\u003e\n      \u003ctd\u003eA rifle magazine is an inherently large object; the carrier cannot change that, but every inch it adds to the body profile beyond the magazine itself is a variable that works against the plainclothes role the Lictor M4 was designed for.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccepts 20- and 30-round magazines interchangeably\u003c\/td\u003e\n      \u003ctd\u003eOperational context determines magazine capacity; a carrier that cannot provide the same security, concealability, and speed of access for both 20- and 30-round magazines is a handicap.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRounds-forward and rounds-rearward orientation\u003c\/td\u003e\n      \u003ctd\u003eMagazine orientation preference varies by training background and carry position; a carrier that mandates one orientation is making a technique decision for the end user before the mission determines which technique is correct.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNo retention screws\u003c\/td\u003e\n      \u003ctd\u003eRetention screws back off under daily use. The vibration of movement, temperature cycling, and repeated insertions work against thread engagement over time, and the degradation is gradual enough to miss until retention fails.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFunnel top for magazine seating\u003c\/td\u003e\n      \u003ctd\u003eWhen kitting up before the mission, or tac-loading after a string of fire, a funnel top makes seating a magazine in the carrier more smooth and intuitive.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuick don and doff without lacing through a belt\u003c\/td\u003e\n      \u003ctd\u003eA carrier that has to be threaded on and off a belt is a carrier that stays in one configuration; the Lictor M4's belt clip lets the carrier go on and come off quickly, so scaling a loadout up or down as operational needs shift takes seconds rather than a gear change.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible with MOLLE\/PALS via aftermarket adaptor\u003c\/td\u003e\n      \u003ctd\u003ePersonnel who need to move the carrier from a low-vis configuration to an overt platform like a plate carrier or war belt can do so by simply swapping out the belt attachments with an aftermarket MOLLE\/PALS attachment.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eThe Lictor M4 was built around those requirements from the beginning.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe Rifle Magazine Carrier Compromise\u003c\/h3\u003e\n\n\u003cp\u003eMost rifle magazine carriers fail in plainclothes use because they were never designed for it. Carrying a rifle magazine in a plainclothes role is a commitment the environment does not accommodate easily. A loaded 30-round PMAG adds significant length and width to any carry position. That is physics, not a product failure. The question a magazine carrier can actually answer is how much of that profile it adds beyond the magazine itself.\u003c\/p\u003e\n\n\u003cp\u003eMost rifle magazine carriers do not try to answer that question. They are designed for the overt role, built more like an axe than a scalpel, because the overt role is the larger market and the larger use case. On a waistline under a sport coat, that is the reason the carrier gets left behind.\u003c\/p\u003e\n\n\u003cp\u003eThe Lictor M4 was designed for the plainclothes role first, specifically at the request of personnel who needed to carry a rifle magazine somewhere it would not be noticed. The capability for overt use exists because the design is sound enough to work there too. That is not the same thing as being designed for it.\u003c\/p\u003e\n\n\u003cp\u003eThe Lictor M4 does not solve physics. It does not make a 30-round magazine small. It makes the carrier's contribution to the carry problem as small as possible, and it solves retention, access, and reload guidance without screws, straps, or bungee cords to keep the magazine secure.\u003c\/p\u003e\n\n\u003cp\u003eThe rifle magazine is a logistics problem with a geometry constraint.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe Profile\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor M4 carrier rides at the waistline in the smallest footprint that will securely retain a fully loaded AR-15 or M4 magazine. That constraint is set by the magazine, not by the carrier design. The carrier itself adds as little additional width as possible to that footprint, keeping the profile close to the body rather than projecting away from it. It also claims the minimum possible belt real estate from side to side, so the magazine does not just stay close to the body — it does not crowd out whatever else is riding on the belt next to it.\u003c\/p\u003e\n\n\u003cp\u003eThe carrier's mouth is flared — what RCS calls the funnel top — to guide the magazine in, which counts for the most when the carrier rides behind the blade of the hip, where you cannot see what you are doing and the margin for stowing the magazine cleanly is smaller. The flare gives you that margin back.\u003c\/p\u003e\n\n\u003cp\u003eThe carrier goes on and comes off without threading through a belt loop. For personnel who need to transition to a MOLLE platform, a war belt, or a plate carrier, the belt clip removes to expose mounting holes on the rear face of the carrier that accept aftermarket MOLLE\/PALS adaptors sourced separately. The access geometry is the same on the belt and on the vest. The footprint is the same. The technique does not change.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eRetention Without Screws\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor M4 holds a fully loaded AR-15 or M4 magazine without retention screws.\u003c\/p\u003e\n\n\u003cp\u003eRetention screws are the standard hardware in adjustable-retention magazine carriers, and they are a known failure point: they back off under daily use, and the loosening is gradual enough to go unnoticed until it matters.\u003c\/p\u003e\n\n\u003cp\u003eThe Lictor M4's retention comes from the geometry of the carrier itself. The molded shape grips the magazine body directly, with no screws, no flaps, and nothing to adjust or back off over time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eSelect your magazine above to view available configurations.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eAmbidextrous. Intentionally.\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor M4 is fully ambidextrous, not through a component swap or a reversed installation, but as shipped.\u003c\/p\u003e\n\n\u003cp\u003eRounds-forward and rounds-rearward orientation are both supported without modification. An organization issuing this carrier across a diverse personnel roster does not need a separate procurement line for left-handed carriers or rounds-rearward users.\u003c\/p\u003e\n\n\u003cp\u003eTraining background, operational assignment, injury, and preference all influence how a carrier is accessed in the field. The Lictor M4 does not build an orientation constraint into the system before the first use.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eBelt Clip — Included\u003c\/h3\u003e\n\n\u003cp\u003eThe belt clip ships with the Lictor M4.\u003c\/p\u003e\n\n\u003cp\u003eThe clip mounts to the rear face of the carrier and allows the carrier to go on and come off a belt quickly, without threading through a belt loop, without tools, without a process that discourages the transition. Personnel who need to scale their loadout up or down as assignments shift can do it without a gear change. A magazine carrier that is difficult to add or remove is one that stays in one configuration regardless of what the mission actually requires.\u003c\/p\u003e\n\n\u003cp\u003eThe clip is removable. Behind it are mounting holes on the rear face of the carrier that accept aftermarket MOLLE\/PALS mounting adaptors, sourced separately by the end user, for personnel who need to transition the carrier to an overt platform.\u003c\/p\u003e\n\n\u003cp\u003eThe clip is the default. The holes give the user more options.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCompatible Magazines\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor M4 accepts AR-15 and M4 magazines in standard 20-round and 30-round configurations, including GI aluminum, Magpul PMAG, Tango Down ARC, Lancer, and other common-issue AR-15\/M4 magazines. The Lictor M4 was developed to serve the professional low-vis carry ecosystem — covering the primary AR-15 and M4 magazine platforms in law enforcement, government, and civilian defensive use where concealment of a rifle-caliber reload is the operational requirement.\u003c\/p\u003e\n\n\u003cp\u003eConfirm your specific magazine model against the fitment list above before purchase. Proprietary or non-standard magazine bodies outside the common-issue AR-15\/M4 envelope may not seat correctly.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eAvailable Fitments\u003c\/h3\u003e\n\n\u003ch4\u003eStandard Issue \/ Military Specification\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eGI Aluminum (20-round)\u003c\/li\u003e\n  \u003cli\u003eGI Aluminum (30-round)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eMagpul\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePMAG 20 (M3)\u003c\/li\u003e\n  \u003cli\u003ePMAG 30 (M3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eTango Down\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eARC Magazine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eLancer\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eL5AWM (20-round)\u003c\/li\u003e\n  \u003cli\u003eL5AWM (30-round)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eAdditional fitments available. Select your magazine above to confirm compatibility.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCurrent RCS Customer Note\u003c\/h3\u003e\n\n\u003cp\u003eThe Lictor M4 uses the proprietary RCS belt clip and rear-mount hole pattern introduced with the Lictor platform. Existing RCS magazine carrier attachments from prior product generations may not be compatible. Current Lictor-compatible attachment options are available here: \u003ca href=\"[LINK:%20Lictor-compatible%20attachment%20options%20%E2%80%94%20confirm%20URL%20with%20developer%20before%20launch]\"\u003e[LINK — confirm URL with developer before launch]\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003ch4\u003eDoes the Lictor M4 accept both 20-round and 30-round AR-15 magazines?\u003c\/h4\u003e\n\u003cp\u003eYes. The Lictor M4 accepts both 20-round and 30-round AR-15 and M4 magazines. The funnel top is calibrated to the standard AR-15\/M4 magazine body width, so both configurations seat and draw without adjustment to the carrier. GI aluminum, Magpul PMAG, Tango Down ARC, Lancer, and other common-issue magazines are all supported.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is the difference between the Lictor M4 and the Lictor G9?\u003c\/h4\u003e\n\u003cp\u003eThe Lictor M4 carries a single AR-15 or M4 rifle magazine in 20- or 30-round configurations. The Lictor G9 carries two 9mm or .40-caliber double-stack pistol magazines. Both share the same belt clip system, MOLLE mounting interface, and platform design philosophy. They are separate carriers for separate ammunition types, not variants of the same carrier.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the Lictor M4 support rounds-forward and rounds-rearward magazine orientation?\u003c\/h4\u003e\n\u003cp\u003eYes. The Lictor M4 accepts AR-15 and M4 magazines in both rounds-forward and rounds-rearward orientation without modification. Orientation preference varies by training background and carry context; the carrier does not impose one over the other.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the Lictor M4 work left-handed?\u003c\/h4\u003e\n\u003cp\u003eYes. The Lictor M4 is fully ambidextrous. No component swap, reversed installation, or separate left-hand model is required.\u003c\/p\u003e\n\n\u003ch4\u003eCan the Lictor M4 mount to a plate carrier, war belt, or rifle stock?\u003c\/h4\u003e\n\u003cp\u003eYes. Removing the belt clip exposes mounting holes on the rear face of the carrier that accept aftermarket MOLLE\/PALS mounting adaptors and a range of alternative belt attachment hardware. The MOLLE adaptor is sourced separately.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the Lictor M4 require retention screws?\u003c\/h4\u003e\n\u003cp\u003eNo. The Lictor M4 holds a fully loaded AR-15 or M4 magazine without retention screws. Retention screws are a known failure point in conventional adjustable-retention carriers; they back off under daily use and degrade gradually. The Lictor M4's retention comes from the molded geometry of the carrier itself, with nothing to adjust, tighten, or inspect.\u003c\/p\u003e\n\n\u003ch4\u003eWas the Lictor M4 designed for concealed carry?\u003c\/h4\u003e\n\u003cp\u003eYes. The Lictor M4 was developed at the direct request of a federal law enforcement agency that needed to carry an AR-15 or M4 magazine in a plainclothes role. The design prioritizes the concealment problem with a minimum footprint and a belt clip that snaps on and off quickly so scaling a loadout up or down does not require a gear change. The carrier can be adapted for overt use via aftermarket MOLLE\/PALS hardware, but plainclothes carry is what it was built for.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is the best rifle magazine carrier for plainclothes use?\u003c\/h4\u003e\n\u003cp\u003eA rifle magazine carrier that works concealed must add as little footprint as possible beyond the magazine itself, retain the magazine without hardware that backs off under daily use, and allow clean access under a cover garment. The Lictor M4 was developed at the direct request of a federal law enforcement agency for exactly that role — plainclothes carry of an AR-15 or M4 magazine — and was issued before commercial release in 2021.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the Lictor M4 include a MOLLE adaptor?\u003c\/h4\u003e\n\u003cp\u003eNo. The Lictor M4 ships with the proprietary quick-detach belt clip. Removing the clip exposes mounting holes that accept aftermarket MOLLE\/PALS mounting adaptors, which are sourced separately by the end user. The belt clip is the default configuration.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\n\u003ctable style=\"width:100%; table-layout:fixed;\"\u003e\n  \u003ccolgroup\u003e\n    \u003ccol style=\"width:30%;\"\u003e\n    \u003ccol style=\"width:70%;\"\u003e\n  \u003c\/colgroup\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"width:30%;\"\u003eFeature\u003c\/th\u003e\n      \u003cth style=\"width:70%;\"\u003eSpecification\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrice\u003c\/td\u003e\n      \u003ctd\u003e$49.99\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCarrier Type\u003c\/td\u003e\n      \u003ctd\u003eSingle AR-15 \/ M4 rifle magazine carrier\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary Use\u003c\/td\u003e\n      \u003ctd\u003eLow-vis \/ plainclothes carry\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Magazines\u003c\/td\u003e\n      \u003ctd\u003eAR-15 \/ M4 magazines, 20-round and 30-round\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Magazine Brands\u003c\/td\u003e\n      \u003ctd\u003eGI aluminum, Magpul PMAG, Tango Down ARC, Lancer, common-issue AR-15\/M4\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMagazine Orientation\u003c\/td\u003e\n      \u003ctd\u003eRounds-forward and rounds-rearward — both supported\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFunnel Top\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRetention\u003c\/td\u003e\n      \u003ctd\u003eGeometric — no retention screws\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHand Orientation\u003c\/td\u003e\n      \u003ctd\u003eAmbidextrous\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBelt Attachment Included\u003c\/td\u003e\n      \u003ctd\u003eYes — proprietary quick-detach belt clip\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMOLLE\/PALS Compatible\u003c\/td\u003e\n      \u003ctd\u003eYes — belt clip removal exposes mounting holes; aftermarket adaptor required, sourced separately\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColors\u003c\/td\u003e\n      \u003ctd\u003eBlack, Coyote Brown, Multicam (MATBOCK)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003eUnconditional lifetime warranty — follows the product, not the purchaser\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003c!-- END OF PUBLISHABLE CONTENT --\u003e\n","brand":"Raven Concealment Systems","offers":[{"title":"Black","offer_id":43275546886257,"sku":"ARSMCUBK1.5BC","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Coyote Brown","offer_id":43275546919025,"sku":"ARSMCUCY1.5BC","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Multicam (MATBOCK)","offer_id":43275546951793,"sku":"ARSMCUBK1.5BC-MCS","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/4387\/5185\/files\/LICTORM41.jpg?v=1782231451","url":"https:\/\/www.rcsgear.com\/products\/lictor-rifle","provider":"Raven Concealment Systems","version":"1.0","type":"link"}